Miele PFD 402 - Autoopen; Autoclose

Machine functions
51
AutoOpen
AutoOpen is an additional assisted drying
function. At the end of a programme, the
door opens slightly to allow residual
moisture to escape from the wash cabinet
more quickly.
The door is opened as soon as the
temperature in the wash cabinet has
dropped below a certain value. Before the
door is opened, a corresponding message
is shown on the display and a buzzer
sounds if buzzers are activated.
You can find out which programmes support
this function in the “Programme chart”.
The menu is saved under the following input
path.
Machine functions
AutoOpen

08:15
Off
On
AutoOpen
- On
AutoOpen is activated for all programmes.
- Off
AutoOpen is deactivated for all
programmes.
 Select an option.
AutoClose
This can be used to determine whether the
door should be drawn into the final closed
position by the automatic door lock
immediately after closing or whether it
should remain slightly open.
In its final closed position, the door is
mechanically locked and can be unlocked
and opened again by pressing the door
button.
The menu is saved under the following input
path.
Machine functions
AutoClose

08:15AutoClose
On
Off
- On
AutoClose is activated for all programmes.
The door is drawn into the final closed
position and locked immediately after
closing.
- Off
AutoClose is deactivated for all
programmes. The door hooks into the
latch and can be pulled open again
without pressing the button.
 Select an option.