Miele PFD 402 - Changing Names; Interim Rinse; Resetting Parameters

Further settings
65
Changing names
You can change a programme name if
required. The preceding symbol cannot be
changed.
 Select the Programme name option.
Names can consist of up to 15characters
including spaces. The following options are
available for naming:
- Letters from A to Z;
each new word will automatically start
with a capital letter.
- Numbers from 0 to 9.
- Spaces.
- Use the symbol to delete the last entry.
- Select Reset to reset the programme
names to the factory default settings.
- Press the button to end the process
without saving the name change.
 Enter the name.
 Confirm your entry by pressing OK.
Interim rinse
If required, an additional intermediate wash
block can be activated for selected
programmes.
You can find out which programmes support
this function in the “Programme chart”.
- On
Activates the additional intermediate wash
block for the selected programme.
- Off
Deactivates the additional intermediate
wash block.
 Tap to select an option.
Resetting parameters
You can reset individual programmes to the
factory default settings. The programme
parameters and changed programme
names are reset.

Only reset programme settings?
Yes No
 Select Yes to reset the parameters and
programme names to the factory default
settings.
 Select No to cancel the process.