Miele PFD 402 - Refill Indicator; Replacing the Canister

Cleaning agent and rinsing agent
33
Liquid cleaning agent is dispensed from an
external canister via a suction lance.
Depending on the model, liquid cleaning
agent is dispensed either via an internal
dispensing pump or via an external
dispensing module. Dispensing modules are
connected by the Miele Customer Service
Department and can be retrofitted at any
time.
Refill indicator
When the fill level in the cleaning agent
canister is low, you are reminded to change
the canister.

OK
Change cleaning agent Kanister
Empty status detected.
 Confirm the prompt with OK and change
the cleaning agent canister.
 Fill the dispensing path (see “Machine
functions”)
Replacing the canister
 Place the liquid cleaning agent container
(note the colour marking) on the open
wash cabinet door or on a surface which
is robust and easy to clean.
 Take the lid off the canister and remove
the suction lance. Place the suction lance
on the open wash cabinet door.
 Replace the empty container with a full
one.
 Push the suction lance into the opening of
the container and secure the lid. Observe
the colour coding.
 Feed the suction lance into the container
until it reaches the bottom.
 Wipe up any spilled process chemical
thoroughly.