Miele PFD 402 - Page 97

97
Programme Model
(see data plate)
Programme sequence
1.
Pre-wash 1
2.
Pre-wash 2
3.
Main wash 1
, 
4.
Interim rinse 1
5.
Interim rinse 2
6.
Final rinse 1
, 
7.
Dry+

8.
AutoOpen
Super Short *)
PFD402
X
55°C
30s
(X) X
55°C
30s
− −
PFD404
X
55°C
30s
(X) X
55°C
30s
− −
PFD405
X
55°C
30s
(X) X
55°C
30s
− −
PFD407
X
55°C
30s
(X) X
55°C
30s
− −
Hygiene
PFD402
X X
70°C
10min
X (X) X
80°C/60°C
1min
X −
PFD404
X X
60°C
3min
X (X) X
85°C
4min
− X
PFD405
X X
60°C
3min
X (X) X
85°C/85°C
4min
X X
PFD407
X X
60°C
3min
X (X) X
85°C
4min
− X
X Scheduled programme block (X) Additional programme block; deactivated ex-works
(activated by Miele Customer Service Department)
− Programme block not available for this programme or programme
not available for this model
 Temperature adjustable from 30–85°C
Except: -PFD407 adjustable from 30–93°C -Super Short programme adjustable to max. 70°C
 Holding time adjustable from 0–10minutes
Except: -Super Short programme adjustable from 0–255seconds
 Cold water without rinsing agent
 When the Dry+function is activated, the first value applies; when the function is deactivated, the second value applies.
*) Important note for the Super Short programme
With the Super Short programme, water from the final rinse is not pumped away at the end of the programme. It will be used as the cleaning water in the next Super Short programme. If the water temperature drops below 40°C or if another programme is started, this water will be automatically pumped away when the programme starts.