Miele PTD 701 - 4 Before Working with the Machine; 5 Machine Description; Overview; Mode of Operation

Before working with the machine
46
4 Before working with the machine
 Have the machine commissioned by an authorised service technician or your dealer.
 Have the machine connected according to local standards and regulations by authorised technicians (wa-
ter, waste water, electrical system).
 After connecting the water and the power supplies properly, contact the relevant Miele Customer Service
Department or your dealer for machine commissioning. Ensure that you and operating personnel are
trained in the operation of the machine.
5 Machine description
5.1 Overview
Item
Description
1
Display
2
Suction tube (optional)
3
Integral storage tank for rinse aid and detergent (optional)
4
Door
5
Filter base
6
Strainer
7
Filter cylinder
8
Wash field
9
Integral water softener (optional)
10
Tank heating element
5.2 Mode of operation
After the machine is switched on, the boiler and the tank are filled and heated up to the operating tempera-
ture. Once the required temperatures are reached, the machine is ready for use.
The machine is fully automatic with programmes consisting of three steps: Wash, Drain and Rinse.