Miele PTD 701 - Water Back-Flow Counter

Chef’s PIN menu
61
7.12 Water back-flow counter
The water back-flow counter needs to be reset if, on machines with partial or full demineralisation
cartridge, the accompanying symbol appears on the display.
Calling up the menu
Item
Description
1
Set the total capacity
2
Reset the water back-flow counter
Partial demineralisation cartridge
 Replace the partial demineralisation cartridge.
 Reset the water back-flow counter.
Full demineralisation cartridge
 Have the resin of the full demineralisation cartridge replaced by an authorised service technician.
 Reset the water back-flow counter.