Miele PTD 701 - Priming the Dosing Devices; 9 Operation; Before Switching on the Machine; Switching on the Machine

Operation
65
8.4 Priming the dosing devices
Dosing devices must be primed when air has entered the dosing hose. This occurs when the storage tank is
not refilled in time or the containers are not replaced in time.
Rinse aid dosing device
Detergent dosing device
 Press and hold button 1 or 2 until the dosing device is primed.
9 Operation
9.1 Before switching on the machine
Caution
Possible risk of damage to the wash pump by suction of objects e.g. cutlery
Operate the machine only when the filter system (image 6) is fully inserted.
IMPORTANT Dosing devices must be primed when air has entered the dosing hose because the contain-
ers were not exchanged or refilled in time ( 8.4).
9.2 Switching on the machine
As soon as the start button lights up in white, the machine is ready for operation.
INFO After tapping the dark display (image 1), it can take approx. 20-30 seconds for image 2 to appear.