Milli-Q Direct 8 User Manual

68 Milli-Q® Direct 8/16 System
Viewing Operation, Continued
System Alerts
An example Alert is shown here. This
is an Alert that is currently being
displayed on the bottom of the Main
Display in READY Mode or in
STANDBY Mode.
When the timer for the UV 185 nm
Lamp is reset, then this Alert is no
longer shown on the SYSTEM ALERTS
LCD.
System Alarms
An example Alarm is shown here.
This is an Alarm that is currently
displayed on the Main Display unless
you override the display for one hour.
When the cause of this Alarm is
fixed, then this Alarm is no longer
shown on the SYSTEM ALARMS LCD.
System
Measures
Various measurements related to the
System are shown here.

Milli-Q Direct 8 Specifications

General

Resistivity	18.2 MΩ·cm at 25 °C
Total Organic Carbon (TOC)	< 5 ppb
Pyrogens (Endotoxins)	< 0.001 EU/mL
RNases	< 1 pg/mL
DNases	< 5 pg/mL
Display	Touchscreen
Weight	20 kg
Power Supply	100-240 V, 50/60 Hz
Type of Water Produced	Pure and ultrapure water
Flow Rate	Up to 2 L/min
Particulates	<1 particle/mL (>0.2 µm)
Particles > 0.22 μm	< 1 particulate/mL
Particle Size	0.22 µm
Connectivity	USB
Output Water Type	Ultrapure
Dimensions	504 mm x 332 mm x 467 mm (19.8 in x 13.1 in x 18.4 in)