5-3
Appendix
5
Maintenance
Cleaning the Exterior Surfaces
When the exterior surfaces of the machine are stained, dampen a soft cloth with water or a neutral detergent
diluted with water, squeeze it, and wipe the surfaces with the cloth.
Cleaning the Platen
The platen easily gets dirty with paper dust, etc. generated when a sheet is cut.
Wipe off conspicuous dusts with a dry cloth, a paper towel, etc.
• If ink of the ballpoint pen adheres to it, immerse a soft cloth in water or watered neutral detergent, fully
wring it and wipe ink off with it.
To Next Page
Loading...
