3-42
Output the setting list
Keep the list as the record or to fax for inquiry on the maintenance.
1
Mount the sheet. ( P.2-11)
2
Press the key in the local mode to select the
plotting condition (PEN).
3
Press the key.
• The screen returns to LOCAL mode.
• The device performs the tool switching operation. (The carriage
moves to the left edge and returns to the original position.)
4
Press the key in LOCAL mode.
5
Press to select [LIST].
6
Press the key.
• Output the setting list.
• The current tool condition (cutting condition or plotting condition) is displayed on the
screen.
• When the plotting condition (PEN) is currently displayed, you do not have to select the
plotting condition. Perform the operation from the Step 4.
• You cannot check the contents of the list in the computer directly.
To Next Page
Loading...
Need help?
General
