MIMAKI APC-130 User Manual

5-7
Function Flowchart
Appendix
5
COMMA ND : MG L - I I c
BAUD RATE : 9600
DEV I CE No . : 0
LOWER r i g h t OR I G I N
AUTO . CUT : ON
ROT AT I ON : OF F
BUZZER : OFF
DATA B I TS : 8 B I TS PAR I TY : NON
STOP B I TS : 1 HANDSHAKE : HARD STEP S I ZE : 0 . 05
CLOSE T I ME : 10 s EOF CMD SP 0 : ON
CUT PRESS + : 50 g SLANT CUT : 10mm
CUT SPD : 3 0 cm / s
AUTO, MGL-Ic1, MGL-IIc
1200, 2400, 4800, 9600, 19200, 38400
1, 2 bit
3 ～ 60 s
00 ～ 99
CENTER ORIGIN,
LOWER RIGHT ORIGIN
ON/OFF
5 to 60 cm/s (5cm/s step)
ON/OFF
ON/OFF
7, 8 bit NON, EVEN, ODD
HARD, ENQACK, X-PRM, SOFT, XONOFF 0.05, 0.025, 0.01, 0.1
ON/OFF
0 to 400 g (10g step) 5, 10, 15 mm
EOF CMD NR : ON EOF CMD ZT 0 : ON EOF CMD PG : ON
ON/OFF ON/OFF ON/OFF
EOF CMD ! PG : ON
ON/OFF
Select the distance correction No.
A=500 B=200 A=1000 B=200
DRAW SH I F T = 1 0mm
Select the offset value.
Select the standard value of the A direction. Select the standard value of the B direction.
Plotting pattern Measuring line segment

MIMAKI APC-130 Specifications

General

Brand	MIMAKI
Model	APC-130
Category	Plotter
Language	English