Safety Precautions
ix
1
2
3
4
5
6
Precaution for Use
Cautions on Installation
CAUTION
Be careful with the movable parts Sheets
• Do not touch the rolling grit roller; otherwise, you
may hurt your fingers or tear off your finger nails.
• Keep your head and hands away from any
moving parts during cutting (plotting) operation;
otherwise, you may get your hair caught in the
machine or get injuries.
• Wear proper clothes. (Do not wear loose-fit
clothes or accessories). Bind a long hair.
• Use a strongly curled sheet after removing curl.
Heavily curled sheet affects the cutting (plotting)
result.
Caution with cutters
• Do not touch the cutter blade, which is very
sharp.
• Do not shake or swing the cutter holder;
otherwise, the blade may come off.
CAUTION
A place exposed to direct
sunlight
On an inclined surface A place gets dusty
A place that vibrates
A place exposed to direct air
flow from an air conditioner or
the like
Around a place where flame is
used
A place where temperature or humidity varies significantly
• Use the plotter under the following environmental conditions:
• Operating environment:
15 to 35 °C (Operable temperature) / 16 to 32 °C (Operable humidity)
35 to 75 % (Rh) (Accuracy assurance temperature) / 45 to 65 % (Rh) (Accuracy assurance humidity)
To Next Page
Loading...
Need help?
General
