MIMAKI JFX500-2131 - Replacing Consumables

4-24
Replacing consumables
Replacing the wiper
The wiper is consumable.When the display indicates that it is necessary to
replace the wiper, immediately replace the wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
1
When the message is displayed, press the
key.
2
Press the key.
• The carriage moves to the maintenance position.
3
Remove the wiper.
• Pull out the wiper by holding the protrusions at its both ends.
4
Insert a new wiper.
• Insert a new wiper by holding its both ends.
5
Press the key.
• After its initial operation, the machine returns to LOCAL.
• A cleaning wiper (SPA-0193) is an option.Buy one through the dealer in your region or at our service
office.
• Until the replacement work is completed, [COMPLETED: ent] is displayed on the screen.
After the work up to the Step 3 is completed, press the key.
<LOCAL>
Rep l a c e a WI PER
[MNT]
REPLACE WI PER
EXECUTE [ ENT ]
MAINT.
REPLACE WI PER
COMP L E TED [ ENT ]
Projection
Projection
*Be i ng In i t i a l i zed*
PLEASE WA I T