MIMAKI JFX500-2131 - Stopping a Printing Operation Halfway; Deleting Received Data (Data Clear)

2-14
Stopping a printing operation halfway
Perform the following operation when stopping a printing operation halfway.
1
Press the key during printing.
• The printing operation stops.
• Interrupt data sending at the PC side during the data is sent from the
PC.
• Printing restarts from the interrupted data by repressing the key.
Deleting Received Data (Data Clear)
When you want to stop printing, delete the already received data.
1
Press the key in LOCAL.
2
Press the key.
• The received data is erased then it returns to the Local.
<LOCAL>
DATA REMA I N
DATA CLEAR
[ENT]
** DATA CLEAR **