3-17
1
1
3
Convenient use
5
6
Setting Work Change
Set whether to return to the local mode or keep the remote mode after online drawing.
1
Press the key in LOCAL.
2
Press to select [SET UP].
3
Press the key.
4
Press to select [WORK CHANGE].
5
Press the key.
6
Press to select a set value.
OFF : After online drawing, remote mode is maintained (if
receiving the next drawing data, it is overwritten.)
ON : After online drawing, the Y bar moves to the position set in
view, and the menu returns to local mode.
7
Press the key.
8
Press to select a set value.
OFF : After returning to local, the vacuum stays on.
ON : After returning to local, the vacuum turns off.
• If you selected "OFF" in step 6, proceed to step 10.
9
Press the key.
10
Press the key several times to end the setting.
To Next Page
Loading...
