MIMAKI JFX500-2131 - Changing Origin with FUNCTION Menu

3-3
1
1
3
Convenient use
5
6
Changing origin
Changing origin with FUNCTION menu
To precisely set the origin of coordinates, set its X- and Y- coordinates from the FUNCTION menu. This setting
value becomes the origin position (0, 0).
1
Press the key in LOCAL.
2
Press to select [ORIGIN] and press the
key twice.
• X-axis offset value setting screen is displayed.
3
Press to input the X offset value.
• Setting the origin position of X-axis.
4
Press the key.
5
Press to select [Y OFFSET] and press the
key.
6
Input the Y offset value.
• Setting the origin position of Y-axis.
: The value can be changed in 1mm increments.
: The value can be changed in 10mm increments.
: The value can be changed in 525mm increments.
7
Press the key.
8
Press the key several times to end the setting.
• The set value is not cleared by cutting the power.
FUNCT I ON
VIEW [ENT]
ORIGIN 3000 mm
XOFFS : 1 0 0 mm
ORIGIN 2900 mm
XOFFS : 2 0 0 mm
OR I G I N 2 0 0 mm
SELCT : X OFFSET
OR I G I N 1 0 0 mm
SELCT : Y OFFSET
ORIGIN 1800 mm
YOFFS : 3 0 0 mm
OR I G I N 3 0 0 mm
SELCT : Y OFFSET