MIMAKI JFX500-2131 - Turning the Power ON;OFF

2-3
1
2
Basic Operations
4
5
6
Turning the Power ON/OFF
Turning the Power ON
1
Push the power button.
• Push the power button located on the left side of the
operation panel.
• The firmware version is displayed when the power is turned ON.
• The machine performs its initial operation.
2
The machine enters LOCAL.
3
Turn ON the power of the connected PC.
• Always make the main power switch ON. If you leave it OFF, it may cause nozzle clogging of the
head. In some cases, recovery may become difficult.
Power button
JFX500 St ar t - up
Ve r 1 . 00
<LOCAL>