MIMAKI JFX500-2131 - Cleaning Waste Ink Tray

Maintaining the Capping Station
4-11
1
1
1
4
Routine Maintenance
Cleaning waste ink tray
It is recommended that the wiper and cap be cleaned frequently in order to maintain the high image quality of
the machine and keep the machine itself in good working order.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [STATION MAINT.].
4
Press the key.
• The carriage moves onto the table.
5
Using a waste cloth etc., wipe off ink adhering to
the waste ink tray.
• When you cannot wipe off ink because it is firmly fixed,
scrape it with a spatula etc.
6
Press the key after the cleaning.
• After its initial operation, the machine returns to step1.
• Clean the waste ink tray and the area around it about twice a week (it varies, depending on frequency
in the use of the machine).
• If ink remaining in the waste ink tray gets cured due to UV light, ink discharged at flushing cannot be
moved into the waste ink bottle. It is recommended to clean the waste ink tray frequently.
CARR I AGE OUT
[ENT]
MAINT.
MOV E P O S I T I ON
:STATION MAINT.
MOV E P O S I T I ON
:STATION MAINT.
Carriage