4 Daily Maintenance
4-14
3Open the right maintenance cover.
4Take the cleaning solution into the dropper.
During a pause of idle suction, drop cleaning liquid into a cap until just before it starts overflowing from the
cap.
Repeat dropping the cleaning liquid into each of the other caps the same way.
5Close the maintenance cover and press the [ENTER] key.
6The printer performs idle suction for 30 seconds, and after initial operation, returns to
LOCAL mode.
Ink cap
Fill a cal while
absorption stops.
ST.MAINTENANCE
COMPLETED : ent
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT
To Next Page
Loading...
