6 Operation for Functions
6-16
Invoking MACHINE SETUP functions
List of functions
This section describes briefly the machine setup functions and their setting values.
Functions of [INFORMATION] key
This section describes briefly the [INFORMATION] functions and their setting values.
Name Function Refer to
DRYNESS FAN Make operation settings of the exhaust fan. p. 6-18
DRYNESS FEED Change the feed operation after printing. p. 6-18
CONFIRM. FEED
Set whether or not to perform feeding the media after test printing for
checking of the printing result.
p. 6-18
MEDIA CUT Allocate [] key to direct cut key. p. 6-19
TIME SET Set the date and time on the printer. p. 6-19
UNIT SETUP Change the units of temperature, length and area to be used with the printer. p. 6-19
STAMP SETUP
Make settings for outputting the date and time and printing conditions after
printing.
p. 6-20
Thickness DETECT The media thickness detection is switched to Automatic or Manual. p. 6-21
MACHINE NAME
When the printer is connected through the USB 2.0 interface to a system to
which two or more machines are connected, set the identifier of the printer
to have the system recognize it.
p. 6-21
INFORMATION
Display various information.
The items in [INFORMATION] can be set individually by pressing the
[INFORMATION] key.
p. 6-21
Name Function Refer to
ERROR HISTORY Displays the history of errors. p. 6-21
MAINTE. HISTORY
Displays the records of the date and time when maintenance functions were
used.
p. 6-21
PRT.modeHISTORY
Displays the history of information (printing conditions) of the online print-
ing that has been performed up to now.
p. 6-21
LIST Prints the data for the operator to check the settings of the printer. p. 6-22
VERSION Displays various version information of the equipment. p. 6-25
Serial&DealerNo Displays serial No. and dealer No. of the printer. p. 6-25
To Next Page
Loading...
Need help?
General