6 Operation for Functions
6-20
STAMP SETUP
Set whether or not to output the printing conditions and the date and time of printing.
With STAMP SETUP set to ON, the printer prints the conditions and the date and time after completion of
printing one file.
Available setting values: [ON , OFF]
With STAMP SETUP set to ON, the printer outputs the following particulars after printing on each page.
Machine name
F / W Version
Resolution
Number of divisions
Printing direction
Scanning speed
Number of layers
Media feed correction value
Head gap
Ink type & number of colors
Heater setting temperatures PRE / PRINT / POST
Date and time of printing
When solvent ink is used
When water-based ink is used.
To Next Page
Loading...
