MIMAKI JV5-160S - Disagreement in Print Positions Between Outward Trip and Homeward Trip (Jet Deviation); There Is Staggered Print or Nozzle Missing; Ink Drops Falling on Media During Printing (Ink Drops Falling)

5-5
If image quality is poor
Disagreement in print positions between outward trip and homeward trip
(jet deviation)
Remedy
Execute the [DROP.POScorrect] function.
(Refer to “If dots are not in alignment [DROP.POScorrect] (p.3-35)” )
There is staggered print or nozzle missing
Remedy
Execute the head cleaning [NORMAL].
(Refer to “If the printed pattern is abnormal (Cleaning) (p.3-29)” )
Ink drops falling on media during printing (ink drops falling)
Remedy
1. Execute the wiper cleaning.
(Refer to “Wiper cleaning (p.4-24)” )
2. Execute the ink cap cleaning.
(Refer to “Cleaning the wiper and ink caps [CARRIAGE OUT] (p.4-7)” )
3. Execute the head cleaning [NORMAL].
(Refer to “If the printed pattern is abnormal (Cleaning) (p.3-29)” )
Nozzle missing
Staggered print