MIMAKI JV5-160S - Checking the Accessories

1 Safety Precautions
1-2
Checking the accessories
The articles illustrated below are supplied with your printer as accessories.
Check them for correct quantities and appearance. If you find any problems, please contact your distributor.
Wire management mount
(used with cable tie)
 : 4
Binding bands
 : 4
Hose band
 : 4 Connecting duct : 1
Software CD-ROM
(for JV5) : 1
Operation Manual
(JV5 series) : 1
Protective glasses
 : 1 Request for daily care : 1
Power cable (6m)
 : 1 Phillips screwdriver : 1
Adjustable end wrench
200 MM
 : 1
Hexagonal wrench
 : 1
Screw
 : 6 Screw : 4
P4x12SMW (Black)
4 pcs. (for waste ink tank bracket assembly)
2 pcs. (for waste ink tray)
B4x10 (for wire management mount)
Waste ink tank 4L
 : 1 Waste ink tray : 1