EasyManua.ls Logo

MIMAKI JV5-160S - Cleaning of Flushing Box

MIMAKI JV5-160S
268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Daily Maintenance
4-44
Cleaning of Flushing Box
When the following warning message appears, quickly clean the lid of the suction fan box.
When the warning message above appears 3 times (5 times when water-based ink is used), flushing BOX
needs to replace. The message for replacing flushing BOX appears at 3 levels.
When replacement time is coming, following message appears.
When replacement time comes, following message appears, it becomes local mode every time of print-
ing a data and stops the operation.
Replace flushing BOX. Please call our Sales or Service Agent for servicing.
When keeping using it without exchanging after the time above, following message appears and you
cannot print.
Replace flushing BOX. Please call our Sales or Service Agent for servicing.
When the ink adheres to your skin or enters in your eyes, immediately rinse off
completely with water.
Make sure to wear attached gloves (When solvent ink is used) and goggle to
perform the works.
When the flushing BOX is continuously used without washing, the following
error message will appear and each time one data is printed the machine turns
to Local Mode and stops operation. In this case, stop the use and quickly clean
the lid of suction fan BOX.
L .1 > [ JV5-01 ]
! Flush. BOX CLEANING
L .1 > [ JV5-01 ]
! NearExcg. Flush.BOX
L .1 > [ JV5-01 ]
! Flush. BOX EXCHANGE
**** ERROR 145 ****
FlushingBOX EXCHANGE
**** ERROR 145 ****
FlushingBOX EXCHANGE
CONFIRMATION : ent
L * > [JV5-01]
width : ∗∗∗∗ mm
**** ERROR 145 ****
FlushingBOX CLEANING
**** ERROR 145 ****
FlushingBOX CLEANING
CONFIRMATION: ent
L * >[JV5-01]
width : ∗∗∗∗ mm

Table of Contents

Related product manuals