MIMAKI JV5-160S - Relationship between Head Row and Test Pattern; If the Printed Pattern Is Abnormal (Cleaning)

3-29
Checking for nozzle clogging, and unclogging nozzles
Relationship between head row and test pattern
The relations between head row and test pattern print position are as follow.
If the printed pattern is abnormal (Cleaning)
STEPS:
1Make sure that the printer is in LOCAL mode.
If it is in REMOTE mode, press the [REMOTE] key.
2Press the [CLEANING] key.
3Select the heads to be cleaned using the [] and [] or [] and [] keys, and press
the [ENTER] key.
Select a set of Head 1 and Head 2 or Head 3 and Head 4.
Head 1
Head 2
Head 3
Head 4
Media advance
direction
Pattern of head 1
Pattern of head 1
Pattern of head 2
Pattern of head 4
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
CLEANING
HEAD SELECT : 12. 34
CLEANING
HEAD SELECT : 12. 34