6 Operation for Functions
6-2
Functions Invoked by [FUNCTION] Key
The following five types of functions can be invoked by pressing the [FUNCTION] key.
Invoking SET UP functions
Registering printing conditions in a lump (type registration)
FUNCTION mode provides 17 setup functions.(In the case of usage, it is 18 items about sublimation trans-
fer ink Sb51.)
The setting value of each of the 16 functions other than SETUP RESET can be registered as any of the fol-
lowing four types.(In the case of usage, it is 17 items about sublimation transfer ink Sb51.)
If the types are registered for different kinds of media, respectively, printing conditions can be easily
changed when the media is replaced with another kind of media.
Example of type registration
Function name Description Refer to
SET UP Make various settings concerning print quality. p. 6-2
MAINTENANCE
Maintenance functions are to be executed to keep the printer in good condi-
tion.
p. 6-11
MACHINE SETUP Display various information of the printer or set time or units of measure. p. 6-16
NCU Set operations concerning the nozzle missing detection function. p. 6-26
DISPLAY Set a language to be used with the printer. p. 6-29
When solvent ink is used. When water-based ink is used.
Type 1 For Tarpaulin 1 Photo-paper
Type 2 For Tarpaulin 2 For PET 1
Type 3 FF (Flexible Face) For PET 2
Type 4 PVC Synthetic paper
To Next Page
Loading...
