3-25
Operating the heaters
In case of heater trouble
When the Power Switch of the heaters is turned off, or if heaters have developed problem, the display turns
as shown below.
For recovery from trouble, refer to “Warning messages” of “CHAPTER 5 In
Case of Trouble”.
(Refer to “Warning messages (p.5-15)” )
Heater Power OFF PRE PRT POST
THERM ∗∗ °C ∗∗ °C
PRE PRT POST
BREAK ∗∗ °C ∗∗ °C
*1
*1 : In case of using water-based ink, if the heaters are all set to “OFF", nothing will be displayed.
To Next Page
Loading...
