4 Daily Maintenance
4-18
12Open the maintenance cover, and fill the caps with the cleaning solution using a
dropper.
Since the printer performs idle suction operation intermittently, repeat this work several times to clean the ink
discharge passage. Perform this operation with all the caps.
13Close the maintenance cover and press the [ENTER] key.
The printer performs idle suction for 30 seconds. The heads return to the station and after performing the initial
operation, the printer returns to LOCAL mode.
Ink cap
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT
To Next Page
Loading...
