4 Daily Maintenance
4-28
5Wipe ink and dirt off the head sides using a cotton swab.
6Clean the head media sensor.
Dust or ink sticking to the media sensor at the heads can cause a false detection of media. Wipe the dust and ink
off with a soft cloth.
7After completing whole cleaning, press the [ENTER] key.
8Close the maintenance cover and the front cover.
Never rub the nozzle part.
Clean the sides of the heads using a
cotton swab.
Media sensor at the heads
CR.MAINTENANCE
COMPLETED : ent
Close a cover.
To Next Page
Loading...
