4 Daily Maintenance
4-48
4Clean the wiper guide shaft using a cotton swab or cloth.
If dirt is hard to remove, use a cotton swab dampened with the cleaning solution.
5Install the wiper by holding the projections at both ends.
Be careful of the direction of the wiper.
6Close the maintenance cover, and press the [ENTER] key.
7The printer returns to LOCAL mode.
ST.MAINTENANCE
COMPLETED : ent
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT
To Next Page
Loading...
