4 Daily Maintenance
4-50
4Loosen the screw securing the cutter unit and remove the cutter unit.
5Remove the roller, and install it on the new cutter blade holder assembly.
6Install the new cutter unit.
Tighten the screw to secure the new cutter unit.
7Close the front cover, and press the [ENTER] key.
The printer returns to LOCAL mode.
Roller of cutter unit
L. ∗ > [JV5-01]
width : ∗∗∗∗ mm
∗Being Initialized∗
PLEASE WAIT
To Next Page
Loading...
