MIMAKI TS500P-3200 - Page 113

5-9
Chapter 5 Troubleshooting
1
2
2
2
5
DATA REMAIN Data was received.
• Execute the data clear. ( P.2-20)
Restart if the error message remains after
the execution of the data clear.
MACHINE TEMP./H ***°C The machine is hot.
• Use cooling equipment to lower the room
temperature to a specified range.
• Wait until the machine cools down.
• If the same error message remains after
the machine is left at a specified room
temperature for an enough time, contact
our service desk or your local distributor
to call for service.
MACHINE TEMP./L ***°C The machine is cold.
• Use a heating system to raise the room
temperature to a specified range.
• Wait until the machine warms up.
• If the same error message remains after
the machine is left at a specified room
temperature for an enough time, contact
our service desk or your local distributor
to call for service.
Message Cause Solution