Mindray BC-2800 - Page 132

Reviewing Sample Results
7-10
Figure 7-14 Entering the “Select” window
2. ENTER the start position (“00001”) into the “From” box;
3. ENTER the end position (“00005”) into the “To” box;
4. CLICK “Select” and the lower left corner of the “Select” window will display “Select
samples”, as Figure 7-15 shows;
Figure 7-15 Selecting sample results of locations 1-5
5. CLICK “Exit” to return to the sample table review screen. The selected sample results
will be marked with “*”, as Figure 7-16 shows.
Figure 7-16 Reviewing the selected results
Example2: To deselect the sample results of locations 1 to 5, follow the procedure below to
do so:
1. Enter the start and end positions as instructed in steps 1 to 3 of Example1;
2. CLICK “De-select” and the lower left corner of the “Select” window will display