Mindray BC-2800 - Page 131

Reviewing Sample Results
7-9
Figure 7-12 Selecting a sample result
Press [ENTER] again to deselect the sample result. Once the sample is deselected, the “*”
will disappear, as Figure 7-13 shows.
Figure 7-13 Deselecting a sample result
 Selecting/deselecting multiple sample results
Example1: To select the sample results of locations 1 to 5 (sample IDs:114 to 118 ), follow the
procedure below to do so:
1. Press [F2] to enter the “Select” window, as Figure 7-14 shows;