Reviewing Sample Results
7-23
5. CLICK “Exit” to return to the sample table review screen. The selected sample results
will be marked with “*”, as Figure 7-36 shows.
Figure 7-36 Reviewing the selected results
Example2: To deselect the sample results of locations 1 to 5, follow the procedure below to
do so:
1. Enter the start and end positions as instructed in steps 1 to 3 of Example1;
2. CLICK “De-select” and the lower left corner of the “Select” window will display
“De-select the result”, as Figure 7-37 shows;
Figure 7-37 Deselecting the sample results of locations 1 to 5
3. CLICK “Exit” to return to the sample table review screen. The “*” above those sample
results will disappear, as Figure 7-38 shows.
To Next Page
Loading...
