Customizing the Analyzer Software
5-8
Figure 5-11 Selecting printing format
Auto printing
The auto printing function refers to the analyzer’s ability to automatically print out the analysis
results once they are done. To activate this function, SELECT “ON” (or “OFF”) from the
“Auto” pull-down list, as Figure 5-12 shows.
Figure 5-12 Selecting auto-printing
Setting baud rate
To choose one of the four baud rates, “19200”, “9600”, “4800”, “2400” and “1200”, SELECT
the desired baud rate from the “Baud” drop-down list, as Figure 5-13 shows.
To Next Page
Loading...
