Customizing the Analyzer Software
5-26
Figure 5-42 Select LCD contrast
Setting alarm time
Follow the steps given below to set for how long (2s to120s) the error messages listed in
Table 5-4 should be displayed on the screen.
Table 5-4 Error List
No. Error No. Error No. Error
1 Communication Error 2 Scanner Error 3 Scanner
Communication Error
4 Environmental
Temperature Abnormal
5 Background Abnormal 6 HGB Error
7 HGB Adjustment 8 WBC Clog 9 WBC Bubbles
10 RBC Clog 11 RBC Bubbles
1. SELECT “Alarm time(s)”, as Figure 5-43 shows;
2. ENTER the desired digits.
To Next Page
Loading...
