Customizing the Analyzer Software
5-27
Figure 5-43 Setting alarm time
Selecting PMB color (administrator password needed)
The PMB color refers to the background color of the screen when your analyzer is in the
prediluted mode. Follow the steps below to select the PMB color.
1. Enter the administrator password as introduced in Chapter 5.2.1;
2. At the “Settings” screen, press [F1] to select the “Other” group;
3. SELECT “Black” (default) or “Blue” from the “PMB color” drop-down list, as Figure
5-44 shows.
Figure 5-44 Setting PMB color
Delete data information list
You can delete the information in the list of “Dept.”, “Sender”, “Tester” and “Checker” stored
To Next Page
Loading...
