DICOM/HL7 11-15
Name NOTE
Timeout
Refers to time after which the system will stop trying to
establish a connection to the service. Value: 5－60s, in
increments of 5, and 15 by default.
Listen Mode
This function enables the ultrasound system to use the
listen port for data receiving.
Listen Port
Port for ultrasound system to receive data after the listen
mode function is activated. Here, the port should be
consistent with that of the HL7 server port.
For details of listen port setting, refer to settings in the
server.
Add Click to add the Worklist service to the service list.
Cancel Click to cancel the parameter setting.
Update
Select an item in the service list, change the parameters
in the above area, and click [Update] to update the item
in the service list.
Service list
Delete Click to delete the selected service in the service list.
To set default server
Select an item in the service list, click [Default] and you
can see “Y” in the Default column.
11.1.3.8 Others
You can configure different type of DICOM services in different scenarios.
11.1.4 DICOM Strategy Preset
On the DICOM/HL7 preset screen, click [Set DICOM Strategy] to enter the strategy preset screen.
DICOM strategy preset items are described as follows:
To Next Page
Loading...
Need help?
General
