12-2 Setup
Page Description
Region
To set the hospital name, language, time zone, time format and system
date/time.
General
To set patient information, exam setup, patient management, storage, system
dormancy, display and so on.
Image To set general parameters in imaging modes.
Application
To set the measurement ruler, measurement setting, follicle method, comment
setting and so on.
OB
To set the relevant information regarding the fetal gestational age, fetal
growth formula and fetal weight.
Key Probe To assign the functions to the buttons on the probe.
iConsole&Footswitch To assign functions to the foot switch and user-defined keys.
Key Board To assign functions to the F keys of the key board.
Gesture Preset the gesture on the touch screen.
Output Set the output format, the range and the resolution for the image.
Access Control To set the user account control relevant information.
Scan Code To set the code parameters for barcode reader.
Workstation To set the Workstation quick key
12.1.1 Region
Open the Region page via [Setup] [System] [Region].
Item Description
Hospital Information
To set the hospital-relevant information such as name, address,
telephone, and so on.
Language To display the language.
Hospital Logo
Import image for logo loading. Or. Delete imported image.
For a better display effect, please try to use an
image with 400*400 pixels.
Time Zone To select the time zone.
Time Format To select the time format.
Date Format To set the date format.
To set the date for the system.
System Time
Move the cursor over the corresponding field and enter the time
manually using the keyboard, or, move the cursor over the time
segment and press <Set>, then increase or decrease the
required value by clicking the icons on the right side.
Time Sync
To assign a time server and make the time of the ultrasound
machine consistent with the server.
To Next Page
Loading...
