Image Optimization 5-9
Tint Map
Description
This function provides an imaging process based on color difference rather than gray
distinction.
Operations Tap [Tint Map] on the touch screen to select the map.
TSI
Description
The TSI function is used to optimize the image by selecting acoustic speed according
to tissue characteristics.
Operation Tap [TSI] on the touch screen to select.
The system provided 4 ways of optimization for specific tissues: general, muscle, fluid
and fat.
Smooth
Description This feature is used to reject the noise and smooth the image.
Operation Rotate the knob under [Smooth] to adjust the parameter.
The bigger the value is, the higher the smooth becomes.
Optimize Speed
Description It refers to adjusting the acoustic speed according to tissue characteristics.
Operation
Tap [SSC] on the touch screen to optimize the speed. SSC status and SSI value is
displayed in real time.
Impacts The function is disabled in frozen state.
HD Scope
Description The image inside the ROI is clearer than these outside when the function is enabled.
Operation
Tap [HDScope] on the touch screen, the ROI appears. The image inside the ROI is
clearer than the outside.
When the ROI box is solid line, roll the trackball to change its position.
When the ROI box is dotted line, roll the trackball to change the size.
Press <Set> to switch between the solid line and the dotted line status.
Tap [HDScope]. The image effect increases as the value changes.
Off represents the disable. The larger the value is, the clearer the image becomes.
The function is disabled in frozen state.
iTouch
To optimize image parameters as per the current tissue characteristics for a better image
effect.
It is available for all real-time imaging in B mode.
To Next Page
Loading...
Need help?
General
