Minebea Intec Signum 3 Ex User Manual

49
Signum 3 Ex
Counting Application Z Counting Application Z
Average Piece Weight Updating
In Setup menu:
appl1: count: 3.12.
You can dene whether or not the
reference sample weight is updated
automatically during weighing� The
reference sample weight is updated
automatically only when the following
6criteria are met:
1� The menu item must be set to 3.12.3
inSetup�
2� The current piece count exceeds the
original piece count by at least two�
3� The current piece count is less than
twice the original piece count (does not
apply for the rst updating operation
if the piece count is entered using the
keypad)
4� The current piece count is less than
1000�
Referenzstück-
zahl „alt“
Aufgelegte
Stückzahl
Bereich für Stück-
gewichtsoptimierung
nn + 22 · n
5� The internally calculated piece count
(such as 17�24 pcs) diers by less
than ±0�3 pcs from the nearest whole
number (in this example: 17)
6� The weighing platform is stable in
accordance with the parameter dened
for saving weights�
If automatic average piece weight
updating is selected in the Setup menu
and the piece count (pcs) is displayed,
the Auto symbol is displayed below
the bar graph� If the reference sample
weight has been updated since you
began weighing, the text line shows
the “optimized” code (opt.)� During
an updating operation, 0pt and the
updated piece count are displayed briey
in the measured value line�
The new reference sample weight and
reference sample quantity are saved�

Minebea Intec Signum 3 Ex Specifications

General

Brand	Minebea Intec
Model	Signum 3 Ex
Category	Scales
Language	English