72
Signum 3 Ex
Example:
Weighing in 3 components of a formulation recipe�
Settings (different from the factory settings):
Setup: Application 3: Net total
Setup: Printout, PRT PROT: 7�7� Printer 1:
Select “Component log: Auto printout”, then select the menu line items of your choice
Setup: Printout; PRT PROT: 7�8 Printer 1:
Select “Total data record: Printout as per CF key,” then select the menu line items of your choice
1�) Place empty container on the platform
)
2�) Tare the scale�
Note: If the automatic tare function is enabled, you do not need to press the ) key to tare the
platform; the tare weight is saved automatically when you place the container on the platform
Prompt to fill and save the first component is shown
3�) Add the first component to the container (in this example: 1100 g)
The weight of the first component is displayed
O
4�) Save the rst component weight
Cmp001+ 1.100 kg The component record is printed automatically
Net-total Formulation Application R
Net-total Formulation Application R
To Next Page
Loading...
