This document describes how to use the features and settings available for the 5613 handset
with MiVoice Business. The handset is designed to be used in an office environment and
provides high quality audio capabilities. Before using the handset, it is recommended to read
chapter Description on page 5 to become familiar with the layout and operation of the handset.
For software download and parameter set up, refer to the Installation and Operational Manual
for the Portable Device Manager (WinPDM), Windows version, and the Configuration Manual
for the Mitel 5613 DECT Handset; see Related Documents on page 74.
ABBREVIATIONS AND GLOSSARY
FUNCTIONS AND ACCESSORIES
Note: Some functions are system dependent, license dependent and/or require configurations via
WinPDM/Device Manager.
Device Manager Application for management of handsets, charging racks, etc.
WinPDM: Portable Device Manager:
An application, running on a PC, for managing portable devices, charging
racks, etc.
IPDI International Portable DAM Identity
DAM (DECT Authentication Module)
See IPEI for more information.
IPEI International Portable Equipment Identity:
IPEI/IPDI is needed to enable network subscription of the handset. At
delivery of the handset, IPEI and IPDI are the same and either can be used
for network subscription. If one handset is replaced with another using the
Easy replacement procedure the IPDI will be exchanged and IPEI and IPDI
will no longer be the same. If the IPEI and the IPDI differ, the IPDI shall be
used for network subscription.
FUNCTIONS
Contacts (250 contacts) x
Central phonebook x
Company phonebook(500 contacts) x
Voice mail access x
Vibrator x
Headset connector x
Microphone on/off during call x
Loudspeaking function x
Mini messaging (12 characters) x
Centralized management x
Downloadable languages x
Easy registration x
Enhanced DECT Security x
Easy replacement of handset x
Dynamic output power x
To Next Page
Loading...
