4. Select contact from list, or search name/number by entering characters in the “Search” field.
TIP: When searching for a contact, the input language can be temporarily changed by long
pressing . This can be used to access characters in a foreign language temporarily.
5. Press or "Call" to make the call.
DIAL A NAME FROM THE CENTRAL PHONEBOOK
1. Press the “Menu” Soft key.
2. Select “Contacts”.
3. Select “Central phonebook”.
4. Select “Search by name”.
5. Enter the first name and/or last name, the whole name does not have to be entered.
TIP: When searching for a contact, the input language can be changed temporarily by long
pressing . This can be used to access characters in a foreign language temporarily.
6. Press “Search”.
7. Press or the “Call” key to make the call.
DIAL A NUMBER FROM THE COMPANY PHONEBOOK
1. Press the “Menu” Soft key.
2. Select “Contacts”.
3. Select “Call contact”.
4. The local and company phonebook appears in the same list but the company names are
indicated by a “Locked entry” icon in front of the name. Select contact from list, or search
name/number by entering characters in the “Search” field.
5. Press or the “Call” key to make the call.
Note: The Contacts can also be accessed by pressing the soft key in idle mode.
The middle Soft key is by default configured to access the Contact list, but can be
configured to access the Central Phonebook or the Contacts menu instead. The Soft
key is configured in the handset using WinPDM/Device Manager. For more information,
refer to the Configuration Manual for the handset; see Related Documents on page 74.
Note: The Company phonebook can also be accessed by pressing the soft key in
idle mode.
To Next Page
Loading...
