Mitel 5613 - End a Call During Conversation; Switch between Calls; Transfer a Call; Transfer to New Call

29
3. Press “Select”.
4. Enter number, or press to access the phonebook.
5. Press .
SWITCH BETWEEN CALLS
Prerequisite, a new call has been started during conversation, see Start a New Call during
Conversation on page 28.
1. Press the “More” Soft key.
2. Select “Switch”
1
.
3. Press “Select”. This will switch between the calls.
END A CALL DURING CONVERSATION
Prerequisite, a new call has been started during conversation, see Start a New Call during
Conversation on page 28.
1. Press the “More” soft key during the call.
2. Select “End Call”
1
.
3. Press “Select”. This will end the current call and the previous call is resumed.
TRANSFER A CALL
Prerequisite, a new call has been started during conversation, see Start a New Call during
Conversation on page 28.
When a caller has two ongoing calls, he/she can transfer the first call to the second call.
1. Press the “More” soft key.
2. Select “Transfer”
1
.
3. Press “Select”. This will connect the first caller with the new caller.
TRANSFER TO NEW CALL
An ongoing call can be transferred to a new number. When the new call is established, the
caller that initiated the transfer will be disconnected.
1. Press the "More" soft key during the call.
2. Select "Transfer to new call"
2
.
3. Press "Select".
4. Enter number to the person the ongoing call shall be transferred to, or press to
access the phonebook.
5. Press to transfer the call.
1. Only visible if defined in WinPDM.
2. Visible if the parameters "New Call" and "Transfer" are defined in WinPDM/Device Manager.