2. Press “Yes”.
LOCK AND UNLOCK THE HANDSET
The handset can be protected for unauthorized use. If this function is activated, a PIN code
has to be entered for example to switch on the handset, to answer an incoming call etc. The
default phone lock code (0000) can be changed to any 4 - 8 digit personalized code.
Note: If configured in the handset, a predefined emergency number can be called while the handset is
locked. Refer to the Configuration Manual for the handset; see Related Documents on page 74.
1. Press “Menu”.
2. Select “Settings” .
3. Select “Locks”.
4. Select “Phone lock”.
5. Select “Auto phone lock”.
6. Select “On”, “On in charger”, or “Off”.
MUTE HANDSET ON INCOMING CALL OR MESSAGE
The handset can temporarily be muted on an incoming call or message. The call is not hung
up when the handset is muted. If the call is unanswered, it will revert to voicemail if the handset
has been configured for voicemail. To mute an incoming call or message, long press
while the handset sounds.
To Next Page
Loading...
