Set Date Format
1. Select “Time & Date”.
2. Press "Select".
3. Select “Date format”
4. Press "Select". Selectable date format:
• DD/MM/YYYY, for example: 17/09/2016 (also called Europe)
• MM/DD/YYYY, for example: 9/17/2016 (also called US)
• YYYY-MM-DD, for example: 2016-09-17 (ISO 8601)
• MMM DD YYYY, for example: Sep 17 2016
• DD MMM YY, for example: 17 Sep 16
• DD.MM.YYYY, for example: 17.09.2016
• DD-MM-YYYY, for example: 17-09-2016
5. Press "Select" to save the setting.
LOCK SETTINGS
Activate the Automatic Key lock
1. Select “Locks”.
2. Select "Automatic key lock".
3. Select "On" for activation of automatic key lock.
Activate the Phone Lock
The handset can be protected for unauthorized use. If this function is activated, a PIN code
has to be entered for example to switch on the handset, to answer an incoming call etc. The
default phone lock code (0000) can be changed to any 4 - 8 digit personalized code.
1. Select Locks > Phone lock > Auto phone lock.
2. Select “On”, or "On in charger".
3. Enter PIN code
4. Press "OK".
If the PIN code is forgotten it can be removed by your distributor.
Note: A call can be answered or ended while the keypad is locked. Any one of five
predefined emergency numbers can also be called while the keypad is locked as long
as this feature has been configured in the WinPDM/Device Manager.
Note: If configured in the WinPDM/Device Manager, any one of up to five emergency
numbers can be called while the handset is locked. Refer to the Configuration Manual
for the handset; see Related Documents on page 74.
To Next Page
Loading...
