Mitel 5613 - System Handling; Software Upgrade and Additional Features; Handset Updates Via Charging Rack

Mitel 5613 DECT Phone User Guide for MiVB
60
SYSTEM HANDLING
SOFTWARE UPGRADE AND ADDITIONAL FEATURES
Software and parameters in the handset can be upgraded by using the WinPDM or the Device
Manager. Refer to the Installation and Operation Manual for the Portable Device Manager
(WinPDM) Windows Version, or the Installation and Operation Manual for the Device Manager;
see Related Documents on page 74.
Examples of additional features that can be downloaded/configured via WinPDM/Device
Manager:
• Company phonebook
• Downloadable languages
• Customizing the Menu Tree
• Licenses
1
To view the handset’s software version, enter *#34# in idle mode.
HANDSET UPDATES VIA CHARGING RACK
From time to time, users are instructed to leave their handsets in a central charging rack to
allow the handset to be updated with new features and functions. An ongoing update is indicated
by the in the handset header bar and an "Updating handset" message is displayed in the
active area.
During the update, a message is displayed to indicate that an update is in progress as shown
in figure 2. The "OK" soft key can be selected to close the message.
Figure 2: Handset Update while in Charger
1. The license(s) can also be added via the Admin menu in the handset.