Mitel 5613 - Contacts; Call Contact

Mitel 5613 DECT Phone User Guide for MiVB
48
The handset sends a diversion reason code to the system by establishing a call. The call will
automatically be disconnected after a few seconds.
To stop diversion, select Internal > Deactivate or select External > Deactivate. In both cases,
confirm by pressing "OK".
Divert Calls if No Reply
1. Select "No reply".
2. Select "Activate" and press the "OK".
3. Enter number (maximum 24 digits) to divert to, or press to access the phonebook.
4. Press "OK".
The handset sends a diversion reason code
1
to the system by establishing a call. The call will
automatically be disconnected after a few seconds.
To stop diversion, select No reply > Deactivate, and confirm by pressing "OK".
Divert Calls When Busy
1. Select "When busy".
2. Select "Activate" and press "OK".
3. Enter number (maximum 24 digits) to divert to, or press to access the phonebook.
4. Press "OK".
The handset sends a diversion reason code
2
to the system by establishing a call. The call will
automatically be disconnected after a few seconds.
To stop diversion, select When busy > Deactivate, and confirm by pressing "OK".
CONTACTS
1. Enter the menu by pressing the “Menu” soft key.
2. Select in the menu.
CALL CONTACT
1. Select "Call contact".
2. Select contact from the list, or enter name or number in the search field.
3. Press , or "Call".
Note: The diversion reason code is defined when configuring the absence/diversion
reason in the WinPDM/Device Manager.
1. The diversion reason code is defined when configuring the absence/diversion reason in the WinPDM/Device Manager.
2. The diversion reason code is defined when configuring the absence/diversion reason in the WinPDM/Device Manager.
Note: A Call contact can also be accessed by pressing the soft key in idle mode.